Firmware Programming

Use this page for the end-to-end firmware programming workflow.

Choose Firmware

Describe how users identify the correct firmware image for their tag model.

Program

1. Connect the base station.
2. Open Tag Programmer. It programs through the base; STM32CubeProgrammer is not needed.
3. Choose the firmware and check the tag type.
4. Put a tag in the base, press Program and enter its label.
5. Confirm that the tag reaches IDLE and the record gains a line.

To program from a script, use tag-flash.

Verify

Describe the expected post-programming status, version output, or smoke test.